9V IONISATION BATTERY STANDALONE SMOKE DETECTOR

The EI100B is an Ionisation Smoke Alarm that runs on a 9V battery. Ei100B has a dimension of 140x120x45mm.

Ionisation smoke alarms is useful in residential homes, hall and commercial offices. It operate on the principle that electrical current flowing between electrodes in an ionisation chamber is reduced when smoke particles enter.

Ionisation technology gives a rapid response to fast flaming fires.

The Ei100B is easily installed and comes supplied with all necessary screw fixings.

The Ei100B is fitted with a warning flag that pops up when the battery is removed. This prevents the cover from closing when there is no battery fitted to the unit. When the battery is being installed or changed, this flag must be held down while gently pushing the battery into the battery holder.

When the battery is first connected, the alarm may sound for 2-3 seconds - this is normal and means that the battery is connected correctly.

Operation

 The smoke detector will activate the built in sounder upon sensing smoke particles

 The smoke detector will automatically reset itself and silence the sounder when smoke particles are no longer present in the sensing chamber

 The built in sounder will provide a minimum sound output of 85dB at 3m

 The smoke detector has a built in warning flag to prevent installation of the detector without a battery fitted

 The “Test” button will perform a self test and sound the horn (it may take up to 10 seconds)

 The smoke detector will emit a beep every 40 seconds to indicate that the battery back up is depleted and needs replacing

What's In the Box

1 PIECE OF Ei100B