Xiaomi WiFi Repeater Mi Amplifier Expander Extender 2 Antenna

• Two powerful high-gain external antennas give wider coverage and better performance
• Wireless function, make your wireless coverage larger
• Compatible with other brands router
• Transmission rate: 300Mbps
• Support up to 64 devices to fulfill the needs of the whole family
• Manage your network settings easily with the Xiaomi Mi WiFi APP
• This amplifier will upgrade automatically without any setting. Plug and play, easy to use

• Two powerful high-gain external antennas give wider coverage and better performance
• Wireless function, make your wireless coverage larger
• Compatible with other brands router
• Transmission rate: 300Mbps
• Support up to 64 devices to fulfill the needs of the whole family
• Manage your network settings easily with the Xiaomi Mi WiFi APP
• This amplifier will upgrade automatically without any setting. Plug and play, easy to use

• Two powerful high-gain external antennas give wider coverage and better performance
• Wireless function, make your wireless coverage larger
• Compatible with other brands router
• Transmission rate: 300Mbps
• Support up to 64 devices to fulfill the needs of the whole family
• Manage your network settings easily with the Xiaomi Mi WiFi APP
• This amplifier will upgrade automatically without any setting. Plug and play, easy to use

Key Features

You need to choose mainland China, then find this device, and then connect, because the amplifier is in Chiness version.
The blue light is always on: the amplifier is running normally, and the WiFi pairing is successful.
The yellow light is always on: the amplifier is starting up, the process is very short, about 10 seconds.
Blinking blue: Waiting for pairing, pairing, or pairing failed.The pairing failed. The WiFi password of the network may have been changed, or it may be far away from the network.
Steady red light: The boot failed, please re-plug and try to repair. If the problem persists, please call after-sales service.
The initial setting was unsuccessful. After inserting the Xiaomi router USB, the pairing could not be completed.
Please upgrade your router to the latest development or stable version (2.0 or above)
Check if the amplifier has been paired. If it has been paired, please reset the amplifier to the factory settings (hold the reset hole with the card pin for 5 seconds), then re-pair
The paired amplifier appears blue flashing
Try plugging or unplugging the amplifier, or reset the amplifier (use the PIN pin to hold the reset hole for 5 seconds) before re-pairing.
Not supported yet.
When the amplifier is idle, it is found that the upgradeable version will automatically complete the upgrade;
In addition, you can manually upgrade to the latest firmware through the Xiaomi routing client or Xiaomi smart home client.
Need to connect the router at close range, so that the amplifier can get a stable signal, at least two squares or more .

What's In the Box

1* WiFi Amplifier Pro