Godox Xpro-N E-TTL II 2.4G X System HSS Wireless Camera Speedlite Flash Trigger Transmiter for Nikon

Features:

Outstanding Design, Easy Operation and Great Portability
- Extra-large LCD panel, 5 group buttons and 4 function buttons offer
convenient manipulation.
- Xpro-N is quite portable for it only weighs 80g
-Support Type-C USB firmware upgrade and wireless triggering by 2.5mm
sync cord jack.

Specifications:
Model:Xpro-N
Compatible cameras: Nikon cameras (E-TTL II autoflash)Support
for the cameras that have PC sync socket.
Power supply: 2*AA batteries
Flash Exposure Control: E-TTL II
Second-curtain sync :Yes
Focus assist: Yes
Manual flash: Yes
Flash exposure compensation:Yes. ±3 stops in 1/3 stop increments
Flash exposure lock: Yes
Stroboscopic flash?Yes
High-speed sync?Yes
Modeling lamp: Control the modeling lamp by the flash trigger
Beeper: Control the beeper by the flash trigger
Wireless setting: The receiver end can control the camera
ZOOM setting: Adjust the ZOOM value by the transmitter
Firmware upgrade: Upgrade through the Type-C USB port
Memory function: Settings will be stored 2 seconds after last
Transmission range (approx.): 0-100m
Built-in wireless:2.4G
Modulation mode:MSK
Channel:32
Wireless ID: 01-99
Group:16
Display:Large LCD panel, backlighting ON or OFF
Dimension:90x58x50mm
Weight:80g

Package List:
1* Godox XPro-N Wireless Flash Trigger
1* Fomito Cleaning Kit

Key Features

Xpro-N TTL Wireless Flash Trigger can not only control the flashes with built-in Godox wireless X system, e g. camera flashes, outdoor flashes and studio flashes, but also can control the Nikon flashes when using in combination with X1R-N receiver. Featuring multi-channel triggering and stable signal transmission, this flash trigger applies to hotshoe-mounted Nikon cameras
16 Groups and 32 Channels to Wireless Control and Trigger. Full Graphic Display of 5 Groups simultaneously
Fully Support TTL Auto-flash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnification Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc.
Add a Smart TCM Button. Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode
As a Wireless Godox Flash Trigger/A Wireless Nikon Speedlites Trigger/A Wireless Shutter Release Trigger/A Flash Trigger with 2.5mm Sync Cord Jack. Add 01-99 Wireless ID Setting , Which can Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, Avoiding Signal Interference effectively

What's In the Box

1* Godox XPro-N Wireless Flash Trigger
1* Fomito Cleaning Kit