Waterproof Bicycle Computer Wired Wireless Bike Digital Multifunction Bicycle Stopwatch Motion Sensor Speed Counter

Features:

Large screen design, ultra-wide operating temperature!

High-brightne white light display, double-line four-window display, color box. With English manual, stopwatch use -- 2032 on battery

Notice:

1. The wheels that can be used need to have a diameter of 10.00CM-99.99CM (that is, 4-inch to 40-inch cars are suitable)

2. If you have any installation probl, please feel free to contact customer service

Wirele computer installation steps

1. the blaanti-skid spacer under the base

2. Use a cable tie to fix the base on the handlebar [When taking the watch head, pre the buckle down (as shown in the picture above) first and then take out the watch head! ]

3. Snap the watch head into the base, and the watch head will be in good contact with the base only if it is completely stuin p.

4. Unscrew the head screw and install it on the front wheel spokes

5. Fix the sensor on the front fork with a cable tie (left and right front forks can be used)

6. Adjust the position of the ic head and the sensor so that the distance is about 5MM, and then fix them respectively

Wirele computer installation requirements:

1. The linear distance between the wirele and the meter head must be kept within 70cm, so that the meter head can receive the signal and work normally;

2. The distance between the ic head and the should be within 5mm to work normally.

3. The SENSOR arrow position corresponds to the position of the .

Key Features

Mainland China:Origin
CE:Certification
Waterproof Stopwatch:Stopwatch and Accessories
ABS:Material
DC3V:Voltage
5.5x4.5x4.5cm:Product size

What's In the Box

1X Waterproof Bicycle Computer Wired Wireless Bike Speedometer Digital Multifunction Bicycle Stopwatch Motion Sensor Speed Counter